| ¡@ |
 |
| |
| ¡@ |
Precautions In Handling |
shaft
|
|
. |
Please do not strike a gear or sprocket
into the output shaft by hand or hammer |
|
or something like that.¡@It can
cause the shaft to be bent |
|
or warped, damage the bearing or
shorten its life. |
| ¡@ |
|
In trying to alter the shaft additionally
, |
|
please ensure that the shaft does
not bend or the cutting facilitator does not get into
|
|
the motor. |
|
it can break the shaft or cause
vibration or other troubles. |
| ¡@ |
|
Connecting to the machine
|
| If
the machine to wich the motor is fixed generates big
vibrations or shocks, |
|
it can cause a damage to the motor.in
that case,seta buffer or something like that |
| ¡@ |
|
If a stopper is fixed at a place where the product stops
and the |
|
product is stopped with it put against the stopper on
the transmission |
| ¡@ |
|
Correctly adjust the parallel and horizontal degrees of
the shaft |
|
when using the motor with chains
or belts on. if the transmission does not work |
|
smoothly. |
|
the life of the motor can be shortened by vibrations and
shocks generated. |
| ¡@ |
|
Please ensure that no load exceeding the permissible
over hang load (O.H.L) |
|
will be put on the product. fix the sprocket, |
|
the pulley and so on by placing their point of action as
close to the root of shaft as |
|
possible |
| ¡@ |
| Be
careful so as not to tighten the chains and belts too
hard.also, |
|
when using chains slacken them suitable if they slacken
too much it may generate |
|
big shocks at the beginning of operation and damage the
gear head. |
| ¡@ |
|
geared
|
|
Ensure that neither dust,water oil pemeates into the
inside of the geared |
| ¡@ |
| Do
not overload in excess of the permissible overhung load
or thrust load |
| ¡@ |
|
motor
|
| Do
not decompose the motor or parts. The characteristics
may changes. |
| ¡@ |
| If
the brush of the motor has been worn out, the insulation
resistance will be reduced. |
|
if the insulation resistance needs to be managed, please
measure it regularly. |
|
|
When fixing the motor firmly screw the bolts , if the
base to fix the motor on does not |
|
have. |
|
enough depth and hardness and has to much deviation from
flatness, |
|
it can cause vibration during an operation and shorten
the life of the motor,or |
|
damage the fixing leg. |
| |
| If
the polarity is change while the motor is rotating at a
highspeed,it cause a large |
|
flow of electric |
|
current,demagne tization and the brush to wear
prematurely. |
| |
|
Other cautioons
|
|
Please ensure that to further improve our
products,specifications,the method of |
|
usc of our products and so on described in this
catalogue may be change without |
|
nay notice. |
| ¡@ |
|
|
¡@ |
| ¡@ |
| ¡@ |
| ¡@ |
| ¡@ |
| ¡@ |
ABROAD CO., LTD.¡@MSN:chuwhxx@hotmail.com
TEL¡G886-3-3712389¡@FAX¡G886-3-371-2379¡@
Mobile¡G886-933235839
Factory Add¡GNo.14,31 Lin Chuang Wei Vil Kuang-Hsing Pateh City Taoyuan ,334-51 Taiwan |
|
|
¡@ |
 |
